XenServer

Hardware Compatibility List

Primergy BX924 S4

Name Primergy BX924 S4
Vendor Fujitsu
Form-factor Blade
Supported Product Version

Comments

The Primergy BX924 S4 is only supported with the Intel RSTe OpROM for the onboard LSI SCU controller. XenServer does not support the default controller LSI MegaRAID OPROM. The BIOS setting has to be configured as follows: „Advanced“ → „Onboard Devices Configuration” → “SAS/SATA OpROM” = “Intel RSTe” (instead of default “LSI MegaRAID”). For RAID configurations with internal disks a SAS RAID Mezz. Card 6Gb (D3016) (based on LSI 2108) can be used. (Tested using Emulex Corporation OneConnect 10Gb NIC (be3))