Hardware Compatibility List
Citrix StorageLink Gateway
click here for Citrix XenServer HCL
For more information about supported arrays in XenServer 6.0, refer to the XenServer HCL.
What is Citrix StorageLink Gateway?
Citrix StorageLink Gateway lets users automate the configuration and provisioning of virtual machine storage, taking advantage of advanced features of the attached storage array. StorageLink Gateway enables the user to create Microsoft Hyper-V and Citrix XenServer virtual machines from logical vendor-specific storage repositories that support advanced capabilities such as snapshots, clones, thin provisioning, and data deduplication. StorageLink Gateway also uses advanced storage capabilities to rapidly create virtual machines, increase storage utilization, and provide improved business continuity while lowering total cost of ownership.
Citrix StorageLink Gateway seamlessly integrates with storage arrays using either the standards-based SMI-S interface or via a custom vendor-specific StorageLink Storage Adapter.
Storage Devices (23 entries found)
Click on the
buttons below for additional information about specific storage systems.
Compellent Technologies
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| Storage Center | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick Provisioning Thin provisioning Snapshots* |
The Compellent Storage Adapter has been validated with Storage Center 4.5 and Storage Center 5.2. Using the Compellent Storage Adapter requires Dynamic Capacity and Data Instant Replay licenses on Storage Center. Contact your Compellent representative to obtain the licenses.
The latest adapter updates and best practices documentation can be downloaded from Compellent Knowledge Center at http://kc.compellent.com (note: requires a Compellent Knowledge Center user account).
DataCore
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| SANsymphony | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* |
StorageLink supports only SANsymphony 7.0 PSP3 (v7.0.3).
For a DataCore array, you will need a minimum of 3 disks - one for the boot OS (Windows), one for a linear volume, and one for a dynamic volume. The DataCore architecture can create snapshots from the dynamic volume only. If you don't have one, you can't create a virtual machine via snap/clone.
| SANmelody | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* |
StorageLink supports only SANmelody 3.0 PSP3 (v3.0.3).
For a DataCore array, you will need a minimum of 3 disks - one for the boot OS (Windows), one for a linear volume, and one for a dynamic volume. The DataCore architecture can create snapshots from the dynamic volume only. If you don't have one, you can't create a virtual machine via snap/clone.
Dell
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| EqualLogic PS Series | v2.3 v2.4 |
iSCSI | Thick provisioning Thin provisioning Clones Snapshots* |
To use the Dell EqualLogic Series Storage Adapter for StorageLink, please upgrade to
PS Series Firmware v5.0.0. The firmware can be downloaded from Dell EqualLogic
Firmware download site at https://www.equallogic.com/support/download.aspx?id=1502
(note that you need a Dell Support account to access this page).
EMC
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| CLARiiON CX Series | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Clones Snapshots* |
StorageLink 1.0.5 requires EMC SMI-S provider version 3.3.2. StorageLink 2.2 has been tested with the SMI-S provider 4.1.x. Please verify the FLARE version on your array and check compatibility before installing.
To use the EMC CLARiiON Storage Adapter (SMI-S) for StorageLink, the EMC SMI-S provider must be installed and set up. The provider can be downloaded from PowerLink at
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanager/km/secureDesktop?internalId=0b01406680020356
(note that you need a PowerLink account to access this page).
The EMC SMI-S provider release notes can be downloaded from
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b0140668002023d&_irrt=true
(note that you need a PowerLink account to access this page).
For detailed setup and configuration instructions, please refer to the Citrix XenServer and EMC CLARiiON CX4 Series Configuration Guide technote at
http://support.citrix.com/article/CTX126121
NOTE: For snapshots made of XenServer virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
FalconStor Software, Inc.
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| Network Storage Server (NSS) & Continuous Data Protector (CDP) | v2.3 v2.4 |
iSCSI | Thick provisioning Thin provisioning Clones Snapshots* |
GreenBytes
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| GB-X Series | v2.3 v2.4 |
iSCSI | Thin
provisioning Deduplication* |
The GreenBytes StorageLink adapter can be downloaded from http://gbupdate.getgreenbytes.com/gbctxstorlink/citrix_100909.zip
HP
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| EVA 4000 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| EVA 4100/4400 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| EVA 6000 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| EVA 6100 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| EVA 8000 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| EVA 8100 | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
To use the HP Enterprise Virtual Array (EVA) Storage Adapter (SMI-S) for StorageLink, the EVA SMI-S provider that is part of the Command View EVA management software must be installed. Command View EVA management is available at http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodSeriesId=471497&prodTypeId=12169
StorageLink was tested for use with HP Storage Works Command View EVA version 9.1.
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
MSA 2000 G1 Controller Family:
|
v2.3 v2.4 |
Fibre Channel & iSCSI | Thick provisioning Clones Snapshots |
To use the HP Modular Smart Array (MSA) Storage Adapter for StorageLink, ActivePerl must be installed on the host where the StorageLink Service was installed. This is a free download from ActiveState.com: http://www.activestate.com/downloads/
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
MSA 2000 G2 Controller Series:
|
v2.3 v2.4 |
Fibre Channel & iSCSI | Thick provisioning Clones Snapshots* |
To use the HP Modular Smart Array (MSA) Storage Adapter for StorageLink, ActivePerl must be installed on the host where the StorageLink Service was installed. This is a free download from ActiveState.com: http://www.activestate.com/downloads/
NOTE: For snapshots made of XenServer 5.5 virtual machines, the XenCenter operations New VM from snapshot, Create template from snapshot, and Export snapshot as template (and their command-line equivalents) operate slowly, as the hardware does not support creation of hardware clones from snapshots.
| P4000 Series (SAN/iQ) | v2.3 v2.4 |
iSCSI | Thick provisioning Thin provisioning Clones Snapshots* Remote replication – (enables Site Recovery) |
To use the HP LeftHand P4000 Series (SAN/iQ) Storage Adapter for StorageLink, HP CLiQ must be installed on the host where the StorageLink Gateway service is installed. HP CLiQ v8.1 is supported. Please contact your local HP representative for download information.
Additionally, the iSCSI service must be started on the host where CLiQ is installed. The StorageLink service does not utilize this locally running iSCSI initiator, but it is required for the proper functioning of CLIQ.
| StorageWorks XP 20000 series | v2.4 | Fibre Channel | Thick provisioning Clones Remote replication – (enables Site Recovery) |
For important information about using this storage system with StorageLink, read the HP StorageWorks section under Storage System Support in the Citrix StorageLink User Guide or Installation Guide.
IBM
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| N and N Gateway Series | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* Data Deduplication† |
NetApp
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| FAS series | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* Data Deduplication† Remote replication – (enables Site Recovery) |
NOTE: NetApp MetroCluster is explicitly not supported with the currently released versions of StorageLink.
To use Site Recovery functionality (StorageLink version 2.0 and above), SnapMirror and FlexClone licenses are required on the NetApp storage systems. Please contact your local NetApp representative to get appropriate licenses.
If you want to use a NetApp array with the Site Recovery functionality and prefer to use its fully qualified domain name rather than its IP address, you need to assure that the array is configured for DNS and that the checkIP flag in the SnapMirror configuration is turned on. Refer to your NetApp documentation for details.
| V Series | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* Data Deduplication† Remote replication – (enables Site Recovery) |
NOTE: NetApp MetroCluster is explicitly not supported with the currently released versions of StorageLink.
To use Site Recovery functionality (StorageLink version 2.0 and above), SnapMirror and FlexClone licenses are required on the NetApp storage systems. Please contact your local NetApp representative to get appropriate licenses.
If you want to use a NetApp array with the Site Recovery functionality and prefer to use its fully qualified domain name rather than its IP address, you need to assure that the array is configured for DNS and that the checkIP flag in the SnapMirror configuration is turned on. Refer to your NetApp documentation for details.
Nexenta
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| NexentaStor | v2.3 v2.4 |
Fibre Channel and iSCSI | Thick provisioning Thin provisioning Clones Snapshots* Remote replication – (enables Site Recovery) |
To use the Nexenta Storage Adapter for StorageLink, please install the VM DataCenter plugin on the NexentaStor appliance (available from http://www.nexenta.com/corp/content/view/167/112/).
Pillar
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| Axiom | v2.4 | Fibre Channel | Thick provisioning Snapshots* |
Requires Axiom software version 4.2.14.
NOTE: In order to establish proper array initiator groups for XenServer, please contact Pillar Support to download the Linux axiompm RPM and install on each XenServer host prior to assigning storage to the hosts.
Xiotech
| Model | StorageLink Version |
Protocol Support |
Functionality Support ? |
|---|---|---|---|
| Emprise 5000/ISE Storage Blade | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
The link to the Xiotech StorageLink adapter is https://xone.xiotech.com/resources/servicedownloads/Citrix_Storage_Adapter/2.0/Xiotech_Citrix_StorageLink_Adapter_2.0.0.10.zip. For more information contact Blair_Parkhill@Xiotech.com
| Emprise 7000 Series | v2.3 v2.4 |
Fibre Channel | Thick provisioning Clones Snapshots* |
The link to the Xiotech StorageLink adapter is https://xone.xiotech.com/resources/servicedownloads/Citrix_Storage_Adapter/2.0/Xiotech_Citrix_StorageLink_Adapter_2.0.0.10.zip. For more information contact Blair_Parkhill@Xiotech.com
* Supports snapshots for clones
† Supports dedupe of all types of provisioned storage volumes (thin, traditional, clones, or thin clones)
Glossary
- Thick provisioning
- Allocation of physical data blocks for a storage volume for a given size. Also known as Traditional Provisioning.
- Thin Provisioning
- Similar to Thick provisioning, but the number of physical data blocks allocated are limited to only what are needed. This allows for allocation and growth on demand for the storage volume.
- Clones
- An exact copy of a storage volume made by allocating the same number of physical data blocks as the original storage volume, and copying data into the new allocated physical data blocks.
- Snapshots
- A point-in-time record made of the physical data blocks allocated for a storage volume.
- Data Deduplication
- Releasing duplicate physical data blocks from a set of allocated physical data blocks for a storage volume. The storage array does this by scanning for duplicate physical data blocks, and referencing all duplicate physical data blocks to a single physical data block. Also known as Dedupe.
- Remote replication
- Making an exact copy of a storage volume on a remote site by allocating the same number of physical data blocks as the original storage volume, and copying data into the new allocated physical data blocks on the remote site. Enables StorageLink's Site Recovery functionality. Supported in StorageLink v2.0 onwards.
Fabric Hardware (1 entry found)
| Vendor | SMI-S Agent Version | Fabric OS Version |
|---|---|---|
| Brocade | 120.7.0 and above | v5.5.0 and above |
The Brocade SMI-S Agent to be used with Citrix StorageLink can be downloaded from http://www.brocade.com/services-support/drivers-downloads/smi-agent/application_matrix.page
Storage Controllers for Fibre Channel (2 entries found)
| Vendor | I/O Data Rate |
|---|---|
| Emulex Corporation | 2/4/8-Gbps |
| QLogic Corp. | 2/4/8-Gbps |